для заявок - info@carmextools.ru
®
Mill - Thread Toolholders
Single Insert Toolholders With internal
coolant bore
L1 Insert Torx
Ordering Code A D D1 D2 L
Screw Key
* SR0009H12 12 9.5 20 7.5 85 14 S12 K12
SR0010H12 12 9.9 20 7.6 85 16 S12 K12
SR0012F14 14 12.0 20 8.9 75 20 S14 K14
SR0014H14 14 14.5 20 11.2 85 25 S14 K14
SR0017H14 14 17.0 20 13.4 85 30 S14 K14
** SR0018H21 21 18.0 20 14.4 85 30 S21 K21
SR0021H21 21 21.0 20 16.5 94 40 S21 K21
SR0029J30 30 29.0 25 22.4 110 50 S30 K30
SR0048M40 40 48.0 40 35.0 153 78 S40 K40
Order example: SR0029J30
* Not for conical inserts: 12-18 NPT, 12-18 NPTF, 12-19 BSPT
** Cannot be used with the following inserts:
21 I 3.5 ISO, 21 I 8 UN, 21 I 7 UN, 21-11 BSPT, 21-11.5 NPT, 21-11.5 NPTF
Long Shank Toolholders With internal
coolant bore
Insert Torx
Ordering Code A D D1 L
Screw Key
SR0025K21 21 25 20 125 S21 K21
SR0031M30 30 31 25 150 S30 K30
SR0038M30 30 38 32 150 S30 K30
SR0048R40 40 48 40 210 S40 K40
Order example: SR0031M30
For holders with long overhang reduce the cutting speed and feed rate
between 20% to 40% (depends on workpiece material, pitch and overhang)
info@carmextools.ru 153
www.carmextools.ru