для заявок - info@carmextools.ru
®
Mill - Thread Toolholders
Long Carbide Shank Toolholders
With internal
coolant bore
Insert Torx
Ordering Code A D D1 D2 L
Screw Key
SR0010K12C 12 9.9 8 8 125 S12 K12
SR0013H14C 14 13.2 10 10 110 S14 K14
SR0013J14C 14 13.2 10 10 155 S14 K14
SR0015K14C 14 15.2 12 12 175 S14 K14
SR0021K21C 21 21.0 16 16 130 S21 K21
SR0021M21C 21 21.0 16 16 200 S21 K21
SR0027S30C 30 27.0 20 20 270 S30 K30
Order example: SR0015K14C
For holders with long overhang reduce the cutting speed and feed rate between 20%
to 40% (depends on workpiece material, pitch and overhang)
Carbide Shank Toolholders
for Single Point Threading
With internal
coolant bore
Pitch Range Insert Torx
Ordering Code D D1 L
mm TPI Screw Key
SR0005D06C 6 0.5-1.25 48-20 6.8 5.0 63 S06 K06
SR0006H08C 8 0.5-1.75 48-14 8.8 6.0 100 S08 K08
* SR0010M11C 11 0.5-2.00 48-11 13.2 10.0 150 S11 K11
For Inserts see the Thread Turning Tools section of this catalogue
For an internal application use an internal R.H. insert.
* For an external application use an external L.H. insert.
156 info@carmextools.ru
www.carmextools.ru