для заявок - info@carmextools.ru
®
Mill - Thread Technical Section
MTH type
MT11 Sub-Micron Grade with advanced PVD triple coating.
Cutting Feed mm/tooth
Hardness Cutting Diameter = D
ISO Materials Speed
HRc
m/min 2.5 3 4 5 6 7 8 9 10
Nickel Alloys, Titanium Alloys
S and High Temp. Alloys
20-50 0.02 0.02 0.02 0.02 0.03 0.03 0.03 0.03 0.04
45-50 70-80 0.02 0.03 0.03 0.04 0.04 0.05 0.05 0.06 0.07
Hardened Steels
H Cast Iron
51-55 60-70 0.01 0.02 0.02 0.03 0.03 0.04 0.04 0.05 0.06
56-62 40-50 0.005 0.01 0.01 0.02 0.02 0.03 0.03 0.04 0.05
For cutters with long cutting length reduce feed rate by 40%
Positioning
Thread Milling
Chamfering
266 info@carmextools.ru
www.carmextools.ru