для заявок - info@carmextools.ru
Mini Mill-Thread
MTS Carbide grade: MT7
Threading from ISO M1 x 0.25 and 0-80UN.
Working in high cutting speed. Sub-Micron grade with Titanium Aluminum Nitride
multi-layer coating (ISO K10 - K20). To be run at
Short machining time. medium to high cutting speeds. General purpose
Low cutting forces thanks to the short profile. for all materials.
No broken taps.
Machining of hardened materials up to 45 HRc.
Advantages
Enables machining in deep holes. Coolant through the flutes is very effective for
deep holes.
Same tool can produce a wide range of threads
and pitches. Spiral flutes allow smooth cutting action.
Same tool can produce both External and Internal Shorter machining time due to multi (3 to 5) flutes.
threads. Longer tool life due to special triple coating.
MTI - For threading deep parts
Carbide grade: MT8 Sub-micron grade with advanced PVD triple coating (ISO K10-K20). Extremely high heat
resistant and smooth cutting operation, for high performance, and normal machining
conditions. General purpose for all materials.
MT11 Ultra-fine Sub-micron grade with advanced PVD triple blue coating.
Contents: Page: Contents: Page:
Product Identification 226 MTI
MTS Partial Profile 60 233
ISO 227-228 Partial Profile 60 - with Internal Coolant through the flutes 233
UN 229-230 Partial Profile 55 234
G55 231 ISO 235
UNJ - with Internal Coolant through the flutes 232 UN 235
MJ - with Internal Coolant through the flutes 232 Trapez 236
Acme 236
info@carmextools.ru 225
www.carmextools.ru