Carmex Metric Catalog 2015-16 Rev.B

                                                    для заявок - info@carmextools.ru

     ®


                                                                Mill - Thread Technical Section
DMT type
MT7 Sub-Micron Grade with Titanium Aluminum Nitride multi-layer coating (ISO K10 - K20).
          This is a general purpose grade, which can be used with all materials; it should be run at
          medium to high cutting speeds.
                                                      Cutting                        Feed mm/tooth
ISO                      Materials                    Speed                        Cutting Diameter = D
                                                      m/min       3       4       5         6          8        9       10     12
         Low and Medium Carbon Steels < 0.55%C        60-120     0.02     0.03     0.03      0.04        0.05        0.05     0.05    0.05

 P       High CarbonSteels  0.55%C                 60-90      0.015    0.02     0.03      0.03        0.04        0.04     0.04    0.05
         Alloy Steels, Treated Steels                 50-80      0.015    0.02     0.02      0.02        0.02        0.03     0.03    0.04
         Stainless Steels - Free Cutting              70-100     0.015    0.02     0.02      0.02        0.02        0.03     0.03    0.03
 M
         Stainless Steels - Austenitic                60-90      0.015    0.02     0.02      0.02        0.02        0.03     0.03    0.03
         Cast Steels                                  70-90      0.015    0.02     0.02      0.02        0.02        0.03     0.03    0.04

 K       Cast Iron                                    40-80      0.02     0.03     0.03      0.04        0.05        0.05     0.05    0.05
         Aluminum 12%Si, Copper                     100-200     0.02     0.03     0.03      0.04        0.05        0.05     0.05    0.05

 N       Aluminum >12% Si                             60-140     0.015    0.02     0.02      0.02        0.02        0.03     0.03    0.03
         Synthetics, Duroplastics, Thermoplastics     50-200     0.03     0.04     0.05      0.05        0.06        0.06     0.06    0.06




DMTH type
MT11 Ultra-fine Sub-Micron grade with advanced PVD triple Blue coating
                                                     Cutting                               Feed mm/tooth
ISO                      Materials                   Speed
                                                     m/min
                                                                 2      3      4       5        6          8     9      10    12
         Low and Medium Carbon
                                                     60-120      0.02    0.02    0.03     0.03      0.04    0.05       0.05    0.05   0.05
         Steels < 0.55%C
 P       High CarbonSteels  0.55%C                 60-90      0.02    0.02    0.02     0.03      0.03    0.04       0.04    0.04   0.05

         Alloy Steels, Treated Steels                 50-80      0.02    0.02    0.02     0.02      0.02    0.02       0.03    0.03   0.04

         Stainless Steels - Free Cutting             70-100      0.02    0.02    0.02     0.02      0.02    0.02       0.03    0.03   0.03
 M
         Stainless Steels - Austenitic                60-90      0.02    0.02    0.02     0.02      0.02    0.02       0.03    0.03   0.03

         Cast Steels                                  70-90      0.02    0.02    0.02     0.02      0.02    0.02       0.03    0.03   0.04

 K       Cast Iron                                    40-80      0.03    0.03    0.03     0.03      0.04    0.05       0.05    0.05   0.05

         Aluminum 10%Si, Copper                     100-200     0.03    0.03    0.03     0.03      0.04    0.05       0.05    0.05   0.05

 N       Aluminum >10% Si                            60-140      0.02    0.02    0.02     0.02      0.02    0.02       0.03    0.03   0.03
         Synthetics, Duroplastics,
                                                     50-200      0.04    0.05    0.05     0.05      0.05    0.06       0.06    0.06   0.06
         Thermoplastics
         Nickel Alloys, Titanium Alloys
 S       and High Temp. Alloys
                                                      20-40      0.02    0.03    0.03     0.04      0.05    0.05       0.06    0.06   0.06

         Hardened Steels 45-50 HRc                    60-70      0.02    0.02    0.02     0.03      0.04    0.04       0.05    0.05   0.05
 H
         Hardened Steels 50-55 HRc                    50-60      0.01    0.01    0.01     0.02      0.03    0.03       0.04    0.04   0.04



 264                                                      info@carmextools.ru
                                                          www.carmextools.ru